Philips AVENT Vigilabebés DECT Manuale Utente Scaricare il pdf (Pagina 27)

• Perhaps the non-rechargeable batteries of the

baby unit are empty and the baby unit is not

connected to the mains. Replace the non-

rechargeable batteries or connect the baby unit

to the mains. Then press the on/off button to

establish connection with the parent unit.

• If the ‘link’ light on the parent unit still does not

start ashing red, use the reset function to reset

the units to their default settings.

Whydoesthe‘link’lightontheparentunitash

redcontinuouslyandwhyisthemessage‘NOT

LINKED’or‘IAMLINKING’shownonthe

display?

• The baby unit and the parent unit are out

of range of each other. Move the parent unit

closer to the baby unit.

• The baby unit may be switched off. Switch on

the baby unit.

Whydoesthebatterystatuslightonthebaby

unitashred?

• The non-rechargeable batteries of the baby unit

are running low. Replace the non-rechargeable

batteries or connect the baby unit to the mains

(see chapter ‘Preparing for use’).

Whydoestheparentunitbeep?

• If the parent unit beeps while the ‘link’ light

ashes red continuously and the message ‘NOT

LINKED’ or ‘I AM LINKING’ is shown on the

display, the connection with the baby unit is lost.

Move the parent unit closer to the baby unit or

switch the baby unit on, if it was off.

• If the parent unit beeps and the battery symbol

on the display is empty, the rechargeable

batteries of the parent unit are running low.

Recharge the batteries.

• If you have set the room temperature range on

the parent unit and the temperature alert is on,

the parent unit beeps when the temperature

drops below the set minimum temperature

range or when the temperature rises above the

set maximum temperature range.

12 Guarantee and

support

If you need information or support, please visit the

Philips website at www.philips.com/support

or contact the Philips Consumer Care Centre in

your country (see the worldwide guarantee leaet

for contact details). If there is no Consumer Care

Centre in your country, go to your local Philips

dealer or a Philips service centre.

13 Frequently asked

questions

This chapter lists the questions most frequently

asked about the appliance. If you cannot nd the

answer to your question, visit www.philips.com/

support for more frequently asked questions

or contact the Consumer Care Centre in your

country.

WhatisEcoMaxmode?Howdoesthismode

helptheenvironment?

• The Eco Max mode has been developed to

enable you to reduce the energy consumption

of your baby monitor. When you monitor your

baby from a small distance, you can activate the

Eco Max mode. By switching on the Eco Max

mode, your baby monitor uses less energy and

is therefore more environment-friendly.

Whydon’tthepower-onlightofthebabyunit

andthe‘link’lightoftheparentunitcomeon

whenIpresstheon/offbuttonsoftheunits?

• Perhaps the rechargeable batteries of the

parent unit are empty and the parent unit is not

plugged in. Insert the small appliance plug into

the parent unit and put the adapter in a wall

socket. Then press the on/off button to establish

connection with the baby unit.

ENGLISH

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 459 460

Commenti su questo manuale

Nessun commento

Philips AVENT Vigilabebés DECT Manuale Utente Pagina 27

Commenti su questo manuale

Prodotti e manuali riguardandi Prodotti per bambini Philips AVENT Vigilabebés DECT